Copy Router with triple drilling machine

Two 1.5 HP motors with 2800 rpm

5:1 Spindle ratio approx. 14000 rpm

Standard templates for Routing

3 drills with dia of 10-12-10mm for triple drill

Height adjustment for triple drill

Vertical Travel of 120 mm

Horizontal travel of 230 mm

Centering device upto 2.5 meter profiles

Tracer points for 5mm,8mm& 10mm

Standard collet size 8mm

Technical details

3 Ph 380 V, 50-60Hz

Power Output 3 kW

Working Pressure of 6 bar

Air consumption 15 l/min

Overall dimensions 700X1350X1570 mm

Weight of the machine 152kgs

For cutting of upvc profiles

Automatic tilting of head angles for 45 degree & 90 degree

Saw blade diameter 450mm so can cut wider profiles

Manually set angles between 45 & 90 degrees

HMI for feeding cutting length

High accuracy measurement system

Single & both head operation possible

Additional conveyor support for profiles in the movable head

Two hand operation for cutting

Horizontal & Vertical clamp support for high accuracy cutting

Safety guards in both heads for operator safety

Cutting speed can be adjusted

For DHC 450M

Cutting length can be adjusted by moving heads

Scale measurement for length adjustments

Technical Details

Power 400V 3PH 50Hz

Saw motor speed 2800 rpm

Power 3 KW

Saw blade OD 450mm

Maximum cutting width 135mm

Maximum cutting length 3500mm

Minimum cutting length 450mm

Air pressure 6 bar

Air consumption 50 lt/min

Machine height 1800mm

Machine width 1200mm

Machine length 4100mm

Machine weight 900 kgs for DHC 450A, 800 kgs for DHC 450M

Aluminium Copy Router

1.5 HP motor with 2800 rpm

5:1 Spindle ratio approx. 14000 rpm

Standard templates for Routing

Spray Mist Unit for coolant spray

Vertical Travel of 120 mm

Horizontal travel of 230 mm

Centering device upto 2.5 meter profiles

Tracer points for 5mm,8mm& 10mm

Standard collet size 8mm

Technical details

3 Ph 380 V, 50-60Hz

Power Output 1.5 kW

Working Pressure of 6 bar

Air consumption 15 l/min

Overall dimensions 700X1050X1570 mm

Weight of the machine 152kgs

CPME 2B Composite panel cutting & Grooving machine provide services to sectors such as Cladding & advertising with regard to cutting and grooving Aluminium composite panels.

Technical Specifications

Knurling machine with plastic strip inserter

Crimping machine

Testing machine

Knurling machine with plastic strip inserter:

(1) inductive switch: auto stop when finishing knurling; when profile close to knurling

knife, knurling knife will start running, which can avoiding knife running always, save

electricity,high safety performance.

(2) Auto plastic film laminator: equipped with automatic plastic film laminator, when

knurling, stick plastic film at the same time, protect profile also can save cost for

laminator machine.

(3) Knurling knife material: mould steel, very strong, each pair of knurling knife can make

150~200 Tons aluminium profile.

(4) Knurling knife size: Φ80mm, 240 pcs tooth.

(5) plastic roller under knurling knife: material: high quality polyurethane, hard-wearing

(6) Digital display: display knurling deepth, knurling deepth can be adjusted.

(7) Knurling steadily: all movable device can be locked to avoid move when running

(8) Guide rail: Japanese linear guide rail, run smoothly

(9) Inverter control: Omron of Japan inverter

(10) All switch and button: French brand schneider or Sweden ABB

(11) Reducer& motor: Italy SITI

(12) Machine plate: precision grinding and hard chromium(thickness:28mm)

(13) Speed: 0~70m/min (adjustable)

(14) Maximum process section : W 260mm, H 260mm

(15) Table size: W 550mm* L 5500mm (2 sets)

(16) Total power: 1.3kw

(17) Overall dimension: W 1040mm*L 1350mm*H 1550mm

(18) Total weight: about 1000kg

(19) Air compressor: 0.6~1.0Mpa

Crimping machine

After feeding strip,combination between profile and strip not tightly, need use rolling

machine to make them combine tightly

(1) point move : when first start running, point move to adjust suitable position and

suitable pressure for aluminium profile, avoiding profile damage

(2) Steel press roller: mould steel, dia.Φ208~238mm

(3) Up steel roller equipped with digital display, show plastic roller pressure for profile,

also can record history data

(4) Three sets of monitor to show combining pressure

(5) Bended profile aligning device, before rolling, if the profile is bended, in rolling

machine, it is possible to aligning

(6) Three sets of steel roller to combine strip with aluminum profile tightly, the pressure

increase from the first set to the third set, to avoid damage profile because of two big and

too sudden rolling force.

(7) Omron inverter control step-less speed

(8) Japanese Linear guide rail

(9) Two kinds of design for steel roller adjusting, small steel pieces filling device or hand

ashake type; small steel pieces filling type is suitable for volume production; hand

ashake type has high precision

(10) All switch and button: French brand schneider or Sweden ABB

(11) Motor: Italy SITI or Siemens

(12) Machine plate: precision grinding and hard chromium(thickness:28mm)

(13) Speed: 0~70m/min (adjustable)

(14) Maximum process section : W 260mm, H 380mm

(15) Table size: W 550mm* L 5500mm (2 sets)

(16) Total power: 3.55kw

(16) Overall dimension: W 1220mm*L 1300mm*H 1350mm

(17) Total weight: about 1800kg

(18) Air compressor: 0.6~1.0Mpa

Technical details

Total power: 4.85KW

Weight: 2800kg

Help frame: width(500mm) ×length(5500mm);

Floor area: length(15000mm)×width(4000mm)

Day output: 5~6 tons per 10 hours;

Compressed Air: 0.6~1.0Mpa

Section can be processed: width（260mm）×height(380mm)